3.10 Cleaning the exterior of the equipment
Warning: To avoid electric shock,
• ensure that the electrical power to the equipment is interrupted;
• when cleaning the surface of the equipment, apply water to a cloth, and then wipe
the instrument or device. Do not spray or otherwise apply water directly onto any
equipment surface.
Warning: To avoid personal injury, use eye and hand protection during the cleaning
process.
Requirement: Use eye protection when performing this procedure.
Requirement: Wear clean, chemical-resistant, powder-free gloves when performing
this procedure.
To clean the exterior of the equipment:
Clean surfaces of the equipment using only a clean, soft, lint-free paper or clean cloth dampened
with water.
December 5, 2017, 715004751 Rev. C
Page 64
To Next Page
Loading...
