9. Software and rmware updates
9.1. SMP2 Reader (PC software) update
You can update the SMP2 Reader by downloading the most recent version
from the Wavecontrol intranet: www.wavecontrol.com, Home Log-in.
Step 1: Registration
You can register with the intranet in one of these two ways:
• from www.wavecontrol.com (Home Create an account), or
• when connecting the SMP2 with the software (see 8.3).
Step 2: Download and install
Once registered, please go to:
www.wavecontrol.com Home login, and enter your login and password.
You will be directed to the download page.
Once in the download page, click on SMP2 SMP2 software. Download and
install the le: SMP2_software.zip.
9.2. SMP2 rmware update
Please follow these steps:
1. Update SMP2 Reader (please follow the instruction in 9.1).
2. Run the SMP2 Reader software
3. Connect the SMP2 to the PC using the USB cable.
The SMP2 Reader will automatically detect whether a more recent version of
the rmware or the expansion board rmware is available.
4. Click on “Update”.
User’s Manual Electromagnetic Field Meter SMP2 P. 56