The SMP3 can sample the field level continuously and store that data
automatically in its built-in memory at user-configured intervals with a
capacity of up to 1,000,000 samples.
The data stored in the memory can be easily downloaded to a computer via a
USB or fibre optics port for later processing.
The SMP3 is also available with a built-in GPS receiver (optional) to allow
each measurement to be associated automatically with the geographic
location where it was taken.
There are three basic SMP3 models:
•
Broadband:
used with broadband probes.
•
Selective:
used with selective probes.
•
Dual:
used with all types of probes as it combines both features.
Appendix 1 shows information on all the available type of probes.
To Next Page
Loading...
