WAVECONTROL SMP3 - Appendix 1. Available Probes

User’s Manual Electromagnetic Field Meter SMP3 P. 66
Appendix 1. Available probes
The SMP3 has a wide range of probes that make it adaptable to every
sector and application. They include probes for the electric field, magnetic
field, electric and magnetic fields, low or high frequencies, high sensitivity or
high power, broadband or selective.
The probes available as of the date of this version of the Manual are:
Field Probe
Field
Frequency
Measurement Type
WP50
E/H
10 Hz – 3 kHz
Broadband
WP400
E/H
1 Hz – 400 kHz
Selective & Broadband
WP400-3
E/H
1 Hz – 400 kHz
Selective & Broadband
WP10M
E/H
1 Hz – 10 MHz
Selective & Broadband
WPF3
E
100 kHz – 3 GHz
Broadband
WPF6
E
100 kHz – 6 GHz
Broadband
WPF8
E
100 kHz – 8 GHz
Broadband
WPF18
E
300 kHz – 18 GHz
Broadband
WPF40
E
1 MHz – 40 GHz
Broadband
WPF60
E
1 MHz – 60 GHz
Broadband
WPT
E
Mobile frequencies
Broadband selective
WP-WIFI
E
Wifi 2.4G Frequency
Broadband selective
WPH-DC
H
DC – 40 kHz
Selective & Broadband
WPH60
H
300 kHz – 60 MHz
Broadband
WPH1000
H
30 MHz – 1000 MHz
Broadband
You can always find up-to-date technical information at:
http://www.wavecontrol.com/rfsafety/en/products/probes