WAVECONTROL SMP3 - Page 68

User’s Manual Electromagnetic Field Meter SMP3 P. 65
GPS (optional)
Chip set
56-channel u-blox 7 engine, embedded
Position accuracy
Position 2.5 m CEP / 4.0 m
Sensitivity
Tracking: –162 dBm / –158 dBm
SBAS (Satellite Based
Augmentation System)
WAAS/EGNOS/MSAS support
Geodetic system
WGS 84
General Specifications
Battery
Rechargeable Li-ion battery
Operation time
> 24 hours
Standby time
> 3 years
Recharge time
5 – 7 hours at 20ºC (68 ºF)
Temperature range
-10 ºC to +50 ºC (14 ºF to 122 ºF)
Humidity range
5% to 95%, non-condensing
Altitude
Max 3000m (10 000 ft)
Pollution degree
Electrical equipment in industrial areas
Size (without field probe)
100 x 215 x 40 mm (3.94 x 8.46 x 1.57 in)
Weight (without probe)
Broadband version: 560 g (1.23 lb) including the
internal GPS receiver
Selective version: 635 g (1.39 lb) including the
internal GPS receiver
Dual version: 635 g (1.39 lb) including the internal
GPS receiver
Accessories
Hardcase, battery charger, USB to USB-C cable, SMP
Reader software, user manual, probe calibration
certificate