Appendix 2. Applications
The SMP3 is an ideal measurement system for analysing electric and
magnetic fields in public spaces and workplaces. The wide range of probes
that can be used with the SMP3 make a unique system that can easily and
accurately measure low and high frequency fields as well as static fields.
The SMP3 can be used to take measurements in accordance with many
international exposure standards applicable to different industrial sectors. In
order to get the most out of your SMP3, it is important to choose the proper
configuration, so that it will be suitable to the characteristics of the field to be
measured.
The table below shows some normal applications where the general public
or workers may be exposed to EMFs. For each application, the table
shows the general field characteristics, the normal working frequency
range, the standards for the sector and the suitable combination of device
and probe.
To Next Page
Loading...
