WAVECONTROL SMP3 - Technical Specifications

User’s Manual Electromagnetic Field Meter SMP3 P. 64
12. TECHNICAL SPECIFICATIONS
Measurement Functions
Measurement feld probes
Interchangeable; automatic probe detection and
recognition system
Measurement units
V/m, kV/m, µW/cm
2
, mW/cm
2
, W/m
2
, A/m, nT, µT,
mT, T, mG, G, %
Acquisition time
2 samples per second (except in low power mode)
Measurement display
Total field and axis field value (X, Y, Z), maximum,
minimum and average
Average type
Sliding (continuous, normative) or Tumbling (fixed)
Averaging time
10s, 15s, 30s, 1min, 2min, 5min, 6min, 10min,
15min, 30min
Alarm
audible signal, 2800 Hz; adjustable threshold
Memory
Sample acquisition adjustable
period
Normal: 0,5s, 1s, 5s, 10s, 15s, 30s, 1min, 6min, Low
Power (LP): 1min LP, 2.5min LP, 6min LP
Capacity
1 000 000 samples
Up to 1000
measurements
Interfaces
Probe
Automatic detection and recognition
Data download
USB-C connector / Fibre optic
Firmware update
USB-C connector
Battery charger
Coaxial jack connector + LED
Input (110-240 Vac 50-60 Hz)
Output (12 Vdc 1,5A)
Display
Display type
TFT 4,3’’ (272 x 480 pixels)
Backlight
White LED