• Battery: battery charge level.
Battery
discharged
Battery
charging
Battery
fully charged
• Probe information: serial number of the field probe attached to the apparatus
and its frequency information.
Measurement information:
• Logging and average parameters:
1. Average window time.
2. Average type (sliding or tumbling).
3. Sampling rate.
4. Measurement ID
5. Logging time.
Field information: (updated twice per second)
The SMP3 has a double screen display. Depending on the probe selected,
you have the RMS and Peak values or RMS and Average values.
• Total field: instantaneous total field level.
Obtained for three-axis probes as:
• The quadratic sum of each axis field (for field intensity units):
• The sum of each axis field (for power density units):
• Field unit: unit of measurement of the field value shown on the display.
This unit applies to the total field, the field on each axis and the
maximum, minimum and average values.
To Next Page
Loading...
