Use the “QR” virtual button to obtain the
QR code which can be scanned using a
QR scanner or reader to obtain information
about the measurement results (Date and
time of measurement, type of value (RMS,
Peak, Average), the final measured value,
the unit of measurement, serial numbers of
the SMP3 and probe, GPS information.
Example:
2*2020-07-17 10:53:46*RMS*3.7538*V/
M*19SN0976*17WP100238*GPS
LAT*41.446728*GPS LONG*1.975145
To Next Page
Loading...
