Waveshare RS232/485 TO WIFI POE ETH (B) User Manual

RS232/485 TO WIFI POE ETH (B) User Manual
www.waveshare.com
29
The relevant AT commands are as follows:
Table wireless networking AT command list
Item
Note
1
WMODE
Set/query WIFI operation mode (AP, STA)
2
WSSSID
Set/query the SSID of the associated AP.
3
WSKEY
Set/query the encryption parameters in WIFISTA
mode.
4
WANN
Set/query the network parameters of STA.
5
WSLK
Query the wireless connection status of STA
6
WAP
Set/query parameters in WIFIAP mode.
7
WAKEY
Set/query the encryption parameters in WIFIAP
mode.
8
LANN
Set/query module IP in AP mode
9
FAPSTA
Enable/disable module AP+STA mode
Table Socket related AT command list
Item
Note
1
NETP
Set/query network protocol parameters for TCPA
2
TCPB
Enable/disable TCPB function
3
TCPPTB
Set/query the port number of TCPB
4
TCPADDB
Set/query TCPB servers
The webpage configuration is as follows:

Waveshare RS232/485 TO WIFI POE ETH (B) Specifications

General

Model	RS232/485 TO WIFI POE ETH (B)
Serial Interface	RS232/RS485
WiFi Standard	802.11 b/g/n
Ethernet Speed	10/100Mbps
Network Interface	Ethernet
Power Supply	PoE
Operating Temperature	-40°C to 85°C
Humidity	5% ~ 95%