This label warns you of the heavy weight of the WAZER Pro and
instructs you to use the proper jacking and transport technique
This label instructs you to not plug the power into the machine
prior to the completion of all previous steps. You may peel it
This label instructs you to fill the WAZER Pro tank to the correct
level before attempt to turn it on. It also instructs you to prime
the high pressure system before attempt a cut. You may peel it
off after installation.
Peel-able Labels
You may peel them off after the installation process of your WAZER Pro is completed.
This label reminds you to remove the Abrasive Drop Tube
Long Term Storage Insert from the Abraisve Hopper before
operating the machine.
8
To Next Page
Loading...