Wazer Pro - Setting up WAZER Pro

Setting Up WAZER Pro
Install WAZER Pro
In this section, we will discuss the process of choosing locations for the WAZER Pro, unboxing and
dismounting it safely, completing the physical installation, and connecting WAZER Pro to electricity
and water. After that, you will be ready to make your first Cut.
The following procedures must be adhered to during WAZER Pro set up
•
Choose a location for WAZER Pro
• Unbox and Dismount WAZER Pro
• Install WAZER Pro
• Check the Pump Section
• Establish two water connections
• Establish the Power Cable connections
• Anchor WAZER Pro to the wall
Most of these tasks have multiple steps. It is crucially important to get the installation right, or
WAZER Pro will not function properly. Read carefully and don’t hesitate to get in touch with WAZER
support if you are still unclear after reviewing the User Manual.
To see our Videos, visit support.wazer.com/how-to-videos
SECTION
4
26