Radius function manages many NVR accounts with one account using
Radius server.
Radius menu configures status, IP address, and port. Status should be
configured as enable in order to use Radius function. Port by default
can use 1812 and if server assigns a port, then it needs to be
configured..
‘User ID’, Password’ and ‘Radius Shared Key’ are needed from
administrator of Radius server after forwarding NVR account
information to him.
Received ‘ID/Password/Shared key’ are used to register NVR at Control
Center.
<Warning>
Please consult a server manager to use Radius function.
To Next Page
Loading...