3.1 POSITIONING
Prepare an ample support base for the machine that is suitable to support its weight (1). It is important for all terminals of connections to
the water mains (2), to the electrical mains (3) and to the gas mains (in included), to be easily reachable and in any case in the immediate
vicinity of the machine.
Make sure that there is sufficient space for placing and correctly using the appliance. The grinding-dosing machine (4) must be placed in the
immediate vicinity of the appliance in order to allow for comfortable use of the machine.
It is advisable to equip the working base of the machine with a drawer (5) for used coffee grounds. Preferably this would also have a rubber
device to tap the filter holder against.
3. MACHINE INSTALLATION
1
2
3
4
6
7
8
9
10
11
12
13
14
15
5
WARNING
For correct operation, the machine must rest on a perfectly horizontal surface.
Any alignment adjustments of the ma-
chine must be done by adjusting the feet.(6)
DISTRIBUTION MACHINE
To Next Page
Loading...
Need help?
General
