Weidmüller Switch Configuration Utility
A-10
A
A
Appendix A MIB Groups
Weidmueller Ethernet Switches come with built-in SNMP (Simple Network Management Protocol)
agent software that supports cold/warm start trap, line up/down trap, and RFC 1213 MIB-II.
The standard MIB groups supported by the IE-SW-VL08M switch series are:
MIB II.1 – System Group
MIB II.2 – Interfaces Group
MIB II.4 – IP Group
MIB II.5 – ICMP Group
MIB II.6 – TCP Group
MIB II.7 – UDP Group
MIB II.10 – Transmission Group
MIB II.11 – SNMP Group
MIB II.16 – RMON
MIB II.17 – Dot1dBridge Group
MIB II.17.2 – RSTP-MIB Group
MIB II.17.6 – pBridge Group
The IE-SW-VL08M also provides a private MIB file, located in the file “IE-SW-VL08M-MIB.my”
on the Utility CD-ROM or downloadable from the Weidmueller website.
To Next Page
Loading...
