上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
19 /33
3. Press Enter, and check the result:
Connection succeeds, and network connection between the integrated CNC system
and PC is established.
If the connection fails, troubleshoot the following:
1. Check the corresponding cable interface of the router.
2. Check the physical connection and IP setting.
See Set the IP Address for details.
3.1.1.3 Access a Shared Program File
This operation is used to access a shared program file from PC or other integrated
CNC systems after network connection is established correctly.
If you access a folder from PC, before accessing a shared program file, set property
of the target folder as Shared.
To Next Page
Loading...
