Rotary indexing ring TR
Decommissioning
16 Decommissioning
16.1 Decommissioning the product
1. Switch off the product and secure it against unintended switching on.
2. Remove all workpieces and all other objects not belonging to the product from the product.
3. In the case of recommissioning, follow the instructions described, see chapter 11.
17 Dismounting
17.1 Dismounting the product
WARNING
FALLING, TOPPLING, OR LOWERING LOADS
Insufficiently rated load lifting and handling equipment may break. Transportation
vehicles, lifting gear, chains, belts, and other equipment not rated for the product
may fail or tilt.
Failure to follow these instructions can result in death, serious injury, and
equipment damage.
■
Only use transportation vehicles, lifting gear, chains, belts, and other lifting and
handling equipment that comply with all applicable regulations and that are rated
for the weight of the product including packaging.
■
Verify that there are no persons in the danger zone.
■
Verify that the product is properly secured against falling and toppling.
1. Switch off the supply voltage.
2. Dismount the product, see chapter 8 reverse sequence of steps.
18 Disposal
18.1 Disposing of the product
Dispose of the product in compliance with all applicable directives, standards, and safety regulations.
Environmental protection
Dispose of lubricants, greases, residue of cleaning agents and other non-recyclable materials
according to the applicable directives, standards, and safety regulations.
76 / 79
Mounting instructions_062019_4.0_en
To Next Page
Loading...
Need help?
General
