Western multiplex Lynx 2xE1 - Specifications

INSTALLATION AND MAINTENANCE MANUAL
LYNX E1 FAMILY
LICENSED & SPREAD SPECTRUM RADIOS
JUNE 2001
PAGE 2-2 SECTION 2: PRODUCT DESCRIPTION
2.2 Specifications
All specifications are subject to change without notice.
2.2.1 Transmitter
All Models
Frequency Selection Rear Panel DIP switches; 7-cavity RF filter assembly
Modulation OQPSK
Coding Direct Sequence (Lynx Spread Spectrum only)
Number of Spreading 4 (Rear Panel DIP switch selectable) - Lynx.sc ONLY
Codes
2.4 GHz 1xE1 2.4 GHz 4xE1 1.5 GHz 2xE1 1.5GHz 4xE1
sc (31500) HD (31350-20/30)
Output Power (typ.) +30 dBm* +30 dBm* +27 dBm +27 dBm
Output Power (min.) +27 dBm* +27 dBm* +24 dBm +24 dBm
Control Range 16 dB min. 16 dB min.
Frequency Range 2410-2473 MHz 2421-2462.5 MHz 1429-1515.5 1429-1515.5
(occupies (occupies (occupies (occupies
2400- 2400- 1427- 1427-
2483.5 MHz) 2483.5 MHz) 1518) 1518)
* 10 dB less on ETSI compliant models
5.8 GHz E1 5.8 GHz 2 x E1 5.8 GHz 4 xE1 5.8 GHz 8 xE1
sc (31400) sc (31700) HD (31850-20/30) HD (27705-20)
Output Power (typ.) +23 dBm +23 dBm +23 dBm +23 dBm
Output Power (min.) +20 dBm +20 dBm +20 dBm +20 dBm
Control Range 20 dB min. 20 dB min. 20 dB min. 20 dB min.
Frequency Range 5735-5840 MHz 5741-5834 MHz 5750-5825 MHz 5750-5825 MHz
(occupies (occupies (occupies (occupies
5725- 5725- 5725- 5725-
5850 MHz) 5850 MHz) 5850 MHz) 5850 MHz)