1.10
TORQUE CHART Continued…
General Notes:
i) Use the Bolt Finder Chart to identify the CORRECT bolt sizes
ii) Use Extra Care when Torque Tightening into Alloy Engine Block &
Components.
* Denotes: APPLY a Thread Locking Adhesive to threads when fitting
** Denotes: MAXIMUM Torque Setting
Suspension Bolt Tightening Notes
:
i) It is IMPORTANT to REMEMBER that ALL suspension bolts and Nyloc
Nuts will be Torque tightened during the Set-Up stage.
WESTFIELD SPORTS CARS STRONGLY RECOMMEND that during the
assembly of the suspension that ALL suspension bolts and Nyloc Nuts
are `NIPPED’ ONLY and NOT Torque tightened.
To Next Page
Loading...
