Westfield XTR2 - Track Rods & Front Brake Hoses

12.3
SECTION 12 - TRACK RODS & FRONT BRAKE HOSES
Tools Required:-
- 1 x 12mm Spanner / 2 x 13mm Spanners / 1 x 14mm Spanner
Parts Required:-
- 2 x Track Rods / 2 x Rod Ends (3/8” UNF x 5/16” Hole) / 2 x 3/8” UNF Lock Nuts
- 2 x M8 Setscrews x 45mm Long / 2 x M8 Nyloc Nuts / 4 x M8 Washers / 4 x 6mm Long Spacers
- 2 x Front Brake Hoses
Step 1: Install Track Rod
T
rack Rod
View From Passenger Side Of Car
View From Front Of Car
2 off Steel spacers x 6mm
Long
M8 Nyloc Nut & Washers
3/8” UNF Locknut
Passenger Side Upright
M8 Setscrew x 45mm Long