12
Basic Operation
Home Interface Introduction
Operation and Introduction
1.Transmitter model
2.LOGO, Click to enter main menu 3.Normal Timer :Click and hold for reset,slightly click for start/pause
4.Mode Timer:Click and hold for reset,status is set by(Timer)menu
5.Voltage:Receiver voltage,external
5.Return data(External battery)
6.Trim monitor:display active trimming status
7.Boot time:The accumulation boot time , shutdown reset
8.Model name: Click to enter model selecting interface
9.Model types:Click to enter current machine type Interface
10.User name:click into user defined name
11.Trim status:display T1-T4 trim status(T1-T4 while the switch being used),more details please refer
to(Aux Channel)and[Trim Setting]
▲means the position is "up"
●means the position is "neutral”
▼means the position is "down"
12.Transmitter battery capacity
13.Receiver signal strength
14.Fly mode(Throttle lock,normal,Idle1,Idle2)
15.Mixing:Display the mixing after ACT the mixing function
16.Working mode:Display then ACT mode(Trainer,simulator,student)
17.Lock status(Click and hold EXIT/LOCK for 2s)
To Next Page
Loading...
