Wfly ET07 - Throttle Hold(Airplane); AIL Differential(Airplane)

42
The throttle hold function can fix the throttle
servo in the low speed position when the throttle cut
to land is executed, and the throttle hold position
can be adjusted within ±75%. The preset switch
(custom) is responsible for switching this function.
Note: The throttle hold position needs to be
determined according to the specific application of
the model.
Interface path: →Model Menu→Throttle WFLY
Hold
Throttle Hold(Airplane)
Setting method:
Press the key- Press arrow key to select the
setting item, and press the plus or minus key to
adjust the value. Click the Back button to exit the
interface and save the settings.
Touch Screen-Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left corner to
exit the interface and save the settings.
AIL2
(CH7)
AIL1
(CH1)
FLP
（CH6）
Left aileron differential rate Right aileron differential rate
CH6&5
CH5("Aileron2" function Must be
set to “CH7/5")
RX
NOR M
4.2 V
+100% +100%
+100% +100%
CH6&5
AIL1
AIL2
Flap
AIL Differential
INH
Status
00: 0 6: 59
AIL2
(CH7)
AIL1
(CH1)
FLP2
（CH6）
FLP1
（CH5）
When ailerons are controlled by two servos, the
ratio of upper and lower end point of the left and
right ailerons can be independently adjusted.
Connect left ailerons to 7CH and right ailerons to
1CH.
Note: aileron differential, flaperon, Elevon,only
one of the three could be chosen at a time!You
cannot enable both at a time, and a warning screen
will pop up!)
Enter the interface: → Model Menu → WFLY
Aileron Differential
Setting method:
Press the key-Press arrow keys to select the
setting item, and press the plus or minus key to
adjust the value. Click the Back button to exit the
interface and save the settings.
Touch Screen-Click to select the setting item
switching option, (click the value) and click the
setting button on the right to edit the parameter.
Click on the function name in the upper left corner to
exit the interface and save the settings.
AIL Differential(Airplane)
Model Menu
RX
NOR M
4.2 V
INH
SA
Switch
Throttle Hold
Status
+0%
Pos
00: 0 6: 59