+100% +100%
+100% +100%
+100%
-100%
AIL1
AIL2
ELE2
ELE1
Ele v o n
INH
Status
00: 0 6: 59
It is used for the combination of aileron and elevator functions, such as a delta wing aircraft, a tailless
aircraft, and a profiled machine. Left aileron connecting channel 1 (aileron) servo, right aileron connecting
channel 2 (elevator) servo.
Note:
The aileron and elevator movements can be adjusted separately for ELE to Flap, Elevon, and the V-Tail,
which cannot be turned on at the same time. When other mixing controls are enabled, the mixing will pop up
on the interface.
For function conflict prompts, please firstly set other mixed function to be inhibited.
Enter the interface: → Model Menu → ElevonWFLY
Aileron1（CH1）
Aileron2（CH2）
Elevator2（CH1）
Elevator1（CH2）
Aileron stick left rate Aileron stick right rate
It is recommended to set the stick while checking the amount of movement. If the action amount is set too
large, after the aileron and the elevator action are superimposed, the range of the servo may be exceeded,
resulting in no action and no reaction.
To Next Page
Loading...
