Wfly ET07 - Model Type

25
Depending on the type of the model aircraft used,
choose among the following model types. There are
three options for helicopter, airplane and glider,
multicopter in the transmitter. The list in the model
function will also change according to the selected
model.
Note: After selecting the model type, the
transmitter selected model type is automatically
restored to the initial setting. When you select the
model [Model Type] operation, all its parameters
have been reset, so if you are changing the model
type Also want to save the original settings, please
use the [Model Copy] function to back up the model
data in advance.
Enter the interface: → System Setting → WFLY
Model Type
RX
NOR M
4.2 V
Model Type
00: 1 2: 02
Multicopter
Type
Confirm
00: 1 2: 02
RX
NOR M
4.2 V
Model Type
Airplane&Glider
Type
Confirm
RX
NOR M
4.2 V
Model Type
00: 1 2: 02
Helicopter
Type
Confirm
RX
NOR M
4.2 V
Model Type
Confirm
Multicopter
Type
NO
OK
Model type is changed.
Confirm?
00: 0 6: 59
Press the key - select the "Model Type" key, press
the confirm key or the plus or minus key to switch
the model (the model you are using is displayed in
green background); after selecting the model,
toggle the direction button Switch to the "Confirm"
button and press the enter key, the prompt box will
pop up, select "OK" to select the effect, select "No"
to cancel the operation.
Touch screen - Click the "model" button to switch
the model, click the "Confirm" button, a prompt box
will pop up, select "OK" to select the effect, select
"No" to cancel the operation.
Model Type
System Setting
NOTICE