Stick head height adjustment
Tools : 1.5mm socket screwdriver:
Steps:
1. Loosen the upper section head
counterclockwise
2. Then twist the lower head to adjust the height
3. Twist the upper head clockwise to lock it
Stick feel and function adjustment
ET07 uses the newly developed four-bearing
assembly to trim the feel!
Uncover the silicone sheet on the back and adjust
the feel directly.
Note: Do not use excessive force or over twist the
number of turns when adjusting the screw.
Otherwise, the structure assembly would be twisted
off and the screw may fall off, resulting in
irreversible damage.
Soft silicon uncover method
Upper and lower feeling
adjustment position
Upper and lower elastic
adjustment position
Left and right elastic
adjustment position
Tooth adjustment
Smooth adjustment
Upper and lower feeling
adjustment position
Upper and lower elastic
adjustment position
Smooth adjustment
Tooth adjustment
Left and right elastic
adjustment position
Indicator Light of Transmitter
Stick Adjustment
Basic Operation
Power light on
Power light off
RF light off
Off light on
RF light flashes
Turn on,charging
Turn off
Turn off,student or simulator mode
Normal linkage,trainer or normal mode
Enter link status
To Next Page
Loading...
