30
Users can choose familiar operating modes
according to their own operating habits, and ET07
offers a choice of 4 operating modes.
Note: The switch saves immediately for the stick
mode function,
Enter the interface: → System Setting WFLY
→Stick Mode
Setting method:
Key-press the confirm key or the plus /minus key
to switch the stick mode; press the return key to exit
the interface.
Touch panel - click the "mode" number key to
switch mode; click the function name in the upper
left corner to exit the interface
00: 1 2: 02
4
Mode
ELE
THR
RUD
AIL
Mode4
Stick Mode
Select the language displayed on the interface,
ET07 provides Chinese or English display.
Enter the interface: → System Setting → WFLY
Language
Setting method:
Press the button-press the confirm button or the
plus or minus button to switch the language
(immediately save); press the back button to exit
the language selection interface.
Touch screen-click the button to select the
language (immediately save); click the function
name in the upper left corner to exit the interface
Language
Reset all the parameter settings of the transmitter.
Cautious:This operation will lose all the exist
data!
Enter the interface: → System Setting → WFLY
Factory Reset
Setting method:
Press the button-press the confirm button to
activate the reset function, select whether to reset,
"Yes" to reset, "No" to return to the interface; press
the Back button to exit the stick mode interface.
Touch screen-Click the "Restore factory setting"
button, choose whether to reset, "Yes" to reset, "No"
to return to the interface; click the function name in
the upper left corner to exit the interface.
Factory Reset
Set the telemetry display unit
Enter the interface: → System Setting → WFLY
Telemetry Unit
Setting method:
Press the key- arrow keys to switch between
items that need to be replaced. Press the Enter key
to switch the unit type. The return key exits the
interface and saves.
Touch Screen - Click on the item that needs to be
replaced to switch the type. Click the function name
in the upper left corner to exit the interface and
save.
Telemetry Unit
To Next Page
Loading...
