20
*This figure is for illustrative purposes only. Link amplification also changes depending on the
multicopter collective and the flight controller. Please connect according to the instruction manual of the
multicopter kit to be used.
*Motor, electronic speed controller(separately to buy ).
Battery
Link Position(Multicopter)
-Multicopter
The figure below shows the four-rotor multicopter. Please refer to the model manual for specific
applications. Motor,electronic speed controller, flight controller, battery, etc. are sold separately.
MULTI COPTER
1 Aileron
2 Elevator
3 Throttle
4 Rudder
5 Spare
6 Spare
7 Spare
Receiver
output channel
CH1 AILERON
CH2 ELEVATOR
CH3 THROTTLE
CH4 RUDDER
CH5
Receiver and servo Link example
Basic Operation
Use 5CH-9CH when using accessories such as
camera shutters. Use a W.BUS interface or dual
receiver when the channel is insufficient.
Multicopter
controller
To Next Page
Loading...
