Wfly ET07 - Model Select; Model Name

24
00: 0 6: 59
0
0
0
0
Rx :5. 0V Ex t:1 2V
Mo del 1
Us er Na me
RX
NOR M
4.2 V
ET 07
RX
NOR M
4.2 V
Men u
Linkage Setting
General Menu Model Menu
System Setting
00: 0 6: 59
RX
NOR M
4.2 V
Model 2 Model 7
Model 3 Model 8
Model 4 Mo del 9
Model 5 Model 10
Model 1 Model 6
Model Select
00: 0 6: 59
RX
NOR M
4.2 V
Model Copy
Model Name
Model Reset
Model Type
Model Select
System Setting
Low Voltage
Sound
Back Light
00: 0 6: 59
RX
NOR M
4.2 V
Model 1 2
Model 1 3
Model 1 4
Model 1 5
Model 1 1
Model 1 7
Model 1 8
Model 1 9
Model 2 0
Model 1 6
00: 0 6: 59
NO
OK
Sure?
Model Select
The ET07 can store up to 20 groups of model
data, which is used to load the saved model data.
Notice:
In [Model Select], the active item is displayed on a
green background, and the focused model is
displayed on a white background.
Enter the interface:
Method 1: → System Setting → Model WFLY
Select
Method 2: Click on the model name in the
standby interface → Model Select
Setting method:
Press the key - select the desired model name,
press the confirm key the prompt box will pop up
("No" is selected by default), select "Yes" to select
the effect, and select "No" to cancel the operation.
Touch screen - Click on the desired model name,
a prompt box will pop up ("No" is selected by
default), select "Yes" to select the effect, and select
"No" to cancel the operation.
1
2
Model Select
RX
NOR M
4.2 V
.
,
M
N
B
V
C
X
Z
A
S
D
F
G
H
J
K
L
Q
W
E
R
T
Y
U
I
O
P
\
1
2
3
4
5
6
7
8
9
0
Model 1
OK
]
[
Exit
Model Name
Confirm save the model name
And
Return ro the model name list
Cancle the model name change
And
Return ro the model name list
OK
Exit
The model names stored in ET07 can be changed.
The currently selected model name will always be
displayed on the standby screen. This makes it easy
for us to distinguish between different model
settings and to prevent incorrect calls to other
stored information. The name of each model
consists of up to 9 characters.
Enter the interface: → System Setting → WFLY
Model Name
Notice:The model name length supports 9
characters. The keyboard interface can only be
operated by touch screen. To save and modify, just
click the [OK] button, click the [EXIT] button and the
[Back] button to cancel the change to the return list.
Click the "function name" in the upper left corner to
exit to the previous menu List
Setting method:
1 Enter and exit the model name change interface
(keyboard):
Click the key - Toggle the arrow keys to select the
option to change the name.
Press the ENTER button to bring up the name and
keyboard, and press the left button to return to the
model name list.
Touch Screen - Click the model name option to be
changed in the model name list to pop up the name
and keyboard. Click the [EXIT] button in the lower
left corner to cancel the change of the model name
and return to the model name list.
2 Name modification
The use of the keyboard: [←] key is the delete
key, [↑] key is the size letter and symbol switch key,
[EXIT] key is the return key, [OK] button is OK to
save button
Tip: If the name does not have 9 characters,
select any character to insert or delete characters in
front of it.
RX
NOR M
4.2 V
Model Name
Model 2 M odel 7
Model 3 M odel 8
Model 4 M odel 9
Model 5 Model 1 0
Model 1 Mode l 6
00: 0 6: 59
Model Name
System Setting