EasyManua.ls Logo

WHILL Ci - Getting into the Device

WHILL Ci
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
Model Ci User Manual
4. Operating Procedures
4.2. Getting into the Device
Pay attention to the following when boarding.
WARNING
Do not apply the weight of your body to the control pad, controller knob, or accessory bar.
There is a risk that these parts may become disconnected, rendering the device inoperable.
Do not jump onto the foot rest, step onto the foot rest while carrying a heavy object, or
otherwise place an excessive load on the foot rest.
There is a risk of the device being lifteing up and/or tipping over.
Turn off the device power when getting into and out of the device.
There is a risk of unexpected movement of the device caused by accidental contact with the
controller knob.
Lock the brakes before getting into the device.
If the brakes are released, there is a risk that the device may start moving and tip over.
If your body is not stable in the seat assembly, be sure to use the lap belt (if purchased).
There is a risk of falling out of the device. If the device you are using does not have a lap belt,
contact your distributor.
CAUTION
Do not apply force to the device from the side directions.
There is a risk that the device may slip. Do not forcefully push or pull the device from the side.
When using your own cushion, for safety, be sure to use a cushion that has passed a fire-
resistance test.

Table of Contents

Other manuals for WHILL Ci

Related product manuals