4.2.2. Accessing the seat from the side
It is recommended that you get in the device as shown below.
1. Raise the arm.
1) Raise the arm release lever.
2) Rotate the arm backwards.
1
2
2. Sit in the seat assembly.
• Be careful that your hands do not contact
the control pad or the controller knob.
• Because the back support can be folded
forward, do not pull it toward you or apply
force to it in the forward direction.
There is a risk that the back support
may tilt forward, causing an unexpected
accident.
3. Rotate the arm forward.
Check that the arm is locked.
To Next Page
Loading...
