5.3. Adjustment Procedures
The following device adjustments can be made to meet the user's seating needs the body of the user.
• Arm length
“5.3.1 Adjusting the arm length” page 83
• Switching the left and right sides of the directional controller assembly and control pad
•
“5.3.2 Switching the left and right sides of the control assemblies” page 84
• Seat height
“5.3.3 Adjusting the seat height” page 89
• Back support height
“5.3.4 Adjusting the back support height” page 92
• Back support angle
“5.3.5 Adjusting the back support angle” page 93
WARNING
When moving the arm up or down in order to adjust the arm length or for other reason, be
careful that your fingers do not become caught.
There is a risk of injury.
When moving the foot rest up and down, be careful that your fingers do not become caught
in the connection.
There is a risk of injury.
When moving the back support up or down in order to adjust the back support height or for
other reason, be careful that your fingers do not become caught in the bottom of the back
support or the connection.
There is a risk of injury.
CAUTION
When adjusting the device, grasp only the handle parts that are explained in this manual,
and do not hold the device by any other areas.
There is a risk of injury caused when a hand become caught in the device.
Pay attention to the following and perform adjustment in order to ensure safe use.
There is a risk of unexpected accident.
• Be sure to adjust the device to match the user’s body before using it.
• When adjusting, make sure to retighten the bolts.
• Be sure to exit the device before performing adjustment.
• Before performing adjustment, be sure to remove the battery from the device.
To Next Page
Loading...
