4.5.5. Controlling the speed
The device speed can be controlled by the degree of movement of the controller knob.
Increasing the angle of the controller knob increases the device speed while reducing the angle decreases the
speed.
The speed can be controlled in a continuous scale.
High speed (large angle) Low speed (small angle)
• When beginning driving, move the controller knob only by the necessary amount and start moving
slowly.
• The maximum speed when the controller knob is moved all the way varies depending on the speed
that was set with the speed select buttons. For the procedure used to set the maximum speed,
refer to “4.4.2 Adjusting the maximum speed”.
To Next Page
Loading...
