WHILL Ci - Turning on the Power

56
Model Ci User Manual
4. Operating Procedures
4.4. Turning On the Power
WARNING

Do not press the control pad buttons with strong force or using a sharp object.
There is a risk that the control pad may become damaged, rendering the device inoperable.

Lock the brakes before turning on the power.
If the brakes are released, there is a risk that the device may start moving and tip over.
CAUTION

If the power does not turn on, check the magnetic connectors.
The magnetic connectors are located at the connection between the seat assembly and rear
drive base, and the connection between the battery and rear drive base.
Press the power button.
The power turns on.
Power button