1. If the storage basket is installed, unfasten
the storage basket hook from the accessory
bar.
2. Pull the seat release lever on the bottom of
the seat assembly toward you.
Use caution because if you place a knee on
the foot rest or otherwise apply weight to it,
the device may tip over.
3. Grasp the arm rests and lift the seat
assembly straight up to remove it from the
Rear drive base.
Lift up the seat assembly slowly so that it does
not contact other parts.
4. Set the removed seat assembly on the floor
with the cushion side facing up.
Seat
release lever
To Next Page
Loading...
