Winkhaus blueMatic EAV - Page 80

504474480
6
EN
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV Installation, Operating and
Maintenance Instructions
Errors Indication Possible cause Troubleshooting
Does not
operate with
remote control
red LED is not
illuminating
• remote battery
dead
• replace battery in
remote control
the lock works
correctly when
the door is
open but no
longer works
after locking
the door clo-
ses but cannot
be opened
electrically
• a cable in the door
frame is damaged
and has contact
with the frame
profile
• find damaged area
replacerepair
cable
• when locking the
door (contact
latchdead bolt
center keep) there
is a short circuit