504474489
9
EN
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV Installation, Operating and
Maintenance Instructions
Aug. Wi nkhaus Gm bH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen ∙ T +49 369 3950 - 0 ∙ tuerverriegelung @winkhaus.de ∙ www.winkhaus.de
T SB February 2020 · EN · All rights reserved.
Declaration of performance No. 008.3 CPR
1. Unique identification code of the product type:
blueMatic EAV / EAV3, Electromechanical lock for doors according to DIN EN 14846
blueMatic AV2B, Electromechanical lock for doors according to DIN EN 14846
2. Type, batch or serial number of a different identifier for identification of the construction product accor ding to Article 11,
paragraph 4 of the Construction Products Regulation (CPR):
STV-AV3 + motor control EAV3 (mounted / not mounted)
STV-AV2 + motor control EAV3 (mounted / not mounted)
STV-AV2B, STV-AP179 AV2 OR
3. Purpose of use intended by the manufacturer or intended purpose of use of the construction product in accordance with
the applicable harmonised technical specification:
For the use in fire and / or smoke protection doors, which includes a suitable door closing device, to meet the
requirements for such doors in terms of automatic closing and then make sure that the doors stay closed.
For use with fire -protection doors , to get the fire protection of the door system.
4. Name, registered trade name or trademark and contact information of the manufacturer in ac cordance with Article 11,
paragraph 5 of the Construction Products Regulation (CPR):
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen-Dreißigacker / Deutschland
5. Name and contact information of the authorised person, if applicable, who is commissioned with the tasks in accordance
with Article 12, paragraph 2 (CPR):
N / A
6. Systems or systems for the evaluation and inspection of the performance reliability of the construction product in
accordance with Annex V of the Construction Products Regulation (CPR):
System 1
7. The MPA NRW with the identification number 0432- MPA-NRW of the notified body has carried out the type inspection in
accordance with the specifications of EN 14846:2008 and evaluated and verified the performance reliability according to
System 1, as well as issued the test report .
Certificate 0432–CPR–00107-04
(Version: 01)
8. Declared performance:
Significant features Performance Harmonised techni cal specification
Capability for automatic closing
EN 14846:2008
5. 4 Do or mass and clos ing force Class 5: up to 200 kg door mass, 25 N
maximum closing force
Annex A (5.1.2 DIN EN 12209)
Retracti on force of the latch
≥ 2,5 N
Durability the capability to automatic clo se
5. 3.2 D urabilit y of latch action Class S: 200.000 cycles with 50 N load on the
latch
Ability for fire / smoke protection doors assemblies
5.5 Ability for fire / smoke protection doors assemblies Class C: For use in fire / smoke protection doors
up to the fire protection class 30 min suitable
5. 1. 2 Co ntrol of har mful subst an ces No harmf ul substances may be con tained
wit hin or release d by this pro duct
9. The product described under sections 1 and 2 fulfils the performances listed under section 8.
This declaration of perfor mance is ussed under the sole resposability of the manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by:
Meiningen, 05/02/2020
ppa. Dr. D. Warnow, Technical Director ppa. A. Dinkelborg,
Director of Product Management
To Next Page
Loading...
