Regular cleaning
10.2011 ES 7100 PLUS 29
Opening and disconnecting
machine
• Turn the door key clockwise in keyhole
(fig. 9) and open the door.
The 230 V current is automatically
turned off, but the machine still car-
ries 24V current.
If power is turned on, be careful not
to touch moving parts and electri-
cal components!
Removing the coffee waste contain-
ers
• Take out the coffee waste containers
(fig. 10).
• If used, remove plastic bag from the solid
waste container.
• Remove the liquid waste container, empty
it and wipe it clean (fig. 11).
• Carefully wipe dry the sensors of the
liquid waste container (fig. 11).
• Wipe clean the solid waste container,
relocate the liquid waste container inside
the solid waste container and, if used,
insert a new plastic liner in solid waste
container.
Ensure that the sensors in the liquid
container are not covered by the
plastic liner in solid waste contain-
er.
• Leave the coffee waste containers outside
of the machine.
91011
To Next Page
Loading...
