Regular cleaning
30 ES 7100 PLUS 10.2011
Filling the instant ingredient
canisters
Check ingredient level of instant in-
gredient canisters daily.
Replenish when necessary.
The instant ingredient canisters
should be labelled to avoid ingredi-
ents being poured into wrong can-
isters.
• Pull base tray forward (fig. 12).
• Push the outlet tube upwards to close the
outlet spout of the wanted canister
(fig. 13).
• Take the canister by the handle and pull it
forwards (fig. 14) until it is hanging freely
at its end stop in guiding rail. The lid is
automatically triggered open.
If required, lift the canister upwards and
pull forwards over the end stops in guiding
rail. Place canister on a plain, clean
surface.
• Fill the canister with instant ingredient,
press lid slightly down and push back
canister in place.
12 13 14
To Next Page
Loading...
