Additonal routines
68 ES 7100 PLUS 10.2011
Time Discount
The Time discount option is used to set time periods during which
drinks are to be sold at a discount.
A percentage rate is given as a discount on all drinks during the set
periods.
Seven different discount periods can be programmed on a weekly
basis.
For each period a start day and time, and an end day and time must
be defined.
The start and end days are identified by progressive numbers:
(Monday=0, Tuesday=1, etc.) and all weekdays (ALL=7).
This means:
• A time discount period that crosses midnight requires two
period settings, see Example 1, periods 1 and 2.
• If a time discount is to apply within the same period of time
every day of the week, e.g. from 10 a.m. to 2 p.m. (10:00 to
14:00), one period setting stating ALL as start and end day is
sufficient. If a time discount should apply only some of the days
of a week, e.g. Saturdays and Sundays, separate periods must
be defined for each of these days, see Example 2 next page.
• A period cannot have a ‘start time’ later than the ‘end time’, see
Non Example next page.
• The same time period cannot include days from different weeks,
i.e. a period cannot be set from Monday to Monday.
To Next Page
Loading...
