Display messages and trouble shooting
10.2011 ES 7100 PLUS 81
Mixing system overflows.
• Mixing funnel(s) blocked. Replace or clean blocked part(s).
Check if they are positioned correctly.
• Leak in mixing system. Check if the sealing ring is missing at
the mixing funnel.
Quantity of drink is inadequate or dispensing hose has a kink.
• Replace or clean clogged components. Install hose of correct
length.
Coins have difficulties being accepted.
• Press the coin return button.
• Please confer with suppliers manual.
Machine is out of function.
• Check the power supply cord and connect it correctly if
required.
• Check fuses outside of the machine, replace as necessary.
• Check if the drip tray or base tray is empty. Empty, wipe and
dry sensors.
• Ensure that the door is properly closed.
The liquid waste container or the solid waste container is full
with liquid or solid waste.
• Empty liquid waste container.
Machine does not shut down when liquid or solid waste
container is full.
• Check if sensors for containers are soiled. Clean as neces-
sary.
Liquid escaping from machine.
• Ensure that waste containers, trays canisters, mixing funnels
and dispensing hoses are positioned correctly.
• Ensure that sensor for liquid waste container is not covered by
coffee waste bag.
• Check if sensors for drip tray or liquid waste container are
soiled. Clean as necessary.
No drinks are delivered.
• Check if mixing funnels are blocked, and clean as necessary.
Fault Corrective action
To Next Page
Loading...
