Initial setup
18
At the end of the setup program, a test brew is carried out.
The Espresso button blinks.
> Place a container that holds at least 50 ml under the All-In-One dispenser.
> Press a beverage button.
The test brewing starts.
During this test brewing, coffee grinder is fi lled with coffee beans.
> Throw this fi rst cup of coffee away.
Your Automatic Coffee Machine is now ready for operation.
All the settings can be changed now or later on.
For this, refer the chapter “3.6.3 Basic settings” on page 37.
Your selection pls.
08:15 01.03.2010
To Next Page
Loading...
