WMF 900 - 5.2 Messages for Troubleshooting

Care
64
Foamer, variant A:
> Screw the air inlet pipe in place.
Foamer, variant B:
> Put the attachment and the sealing cap in place.
> Insert the hose.
> Insert the milk foamer into the All-In-One spout from below.
> Push the All-In-One spout downwards.
> Lay the milk hose in the guide and place the milk nozzle and, if necessary, also the milk lance back on
the hose (see chapter “2.7 Insert the milk tube” on page 12).
> Insert the coffee grounds container.
> Clean your hands of any residue of the WMF milk system cleaner.