93
7.5.3 Quantity control using the timer
You can program different quantities for brewing and
storage at different times as required, by using the Timer
function in the machine selection menu. Times are
assigned to the day of the week and are not controlled by
the date.
For the settings, refer to chapter 10 on page 120.
7.6 Coffee dispensing (cup/mug/pot/jug)
Once the ground coffee hopper has been filled (see chapter
7.2 on page 86), the desired storage quantity has been
selected (see chapter 7.5 on page 89) and a brew has
already taken place and the coffee is in the storage urn 2,
the machine is operational and coffee can be dispensed by
pressing a beverage key. The display shows the empty
storage urn or the symbol for the storage quantity you have
selected (see chapter 7.5 on page 89):
If there is no coffee in the storage urn 2 but, the following
message is displayed:
Caution!
There is a danger of burning and scalding
in the area of the coffee spout 6.
To Next Page
Loading...
Need help?
General
