131
10.3 Making changes to the timer
10.3.1 Copying the timer
Once a full day’s sequence has been set up, it can easily be
copied to other days. Start from the timer setting mode.
Note:
The Copy function can be accessed from any setting
mode (Operating Time, Preselection, Cleaning or
Self-service mode). In each case, the complete day
is copied, with all the actions set, etc.
Under the column heading “Day”, press the
symbol panel (in this case 1 for example) to access day of
the week selection.
Then use the arrow keys to scroll to page four, and touch
the Copy Day soft key.
Now select the day you would like to copy to other days.
For instance, you have already programmed Monday and
now want to transfer your settings to Thursday.
Start by pressing the Monday soft key.
The day to be copied will now be stored while you carry
out copying. This is shown in the display as follows:
To Next Page
Loading...
Need help?
General
