99
The following display appears:
Press the
or soft keys to alter the quantity starting
from the current setting. The change is displayed both
graphically and as a percentage.
By pressing the
soft key at any time during setting, you
can activate test dispensing to check the selected setting.
The following display appears:
Press the cup coffee soft key to start test dispensing.
If there is no coffee in the storage urn, the following
message is displayed:
Press the soft key to accept the new settings, or press
to quit the setting menu without accepting the changes.
Press the
soft key to scroll to the next settings page.
8.3.2 Beverage selection
To set or alter beverage allocation to a beverage key on the
control panel, press the Beverage soft key.
The following display appears. This list contains standard
beverage settings, which you can allocate to the individual
beverage keys.
Important note:
When you alter the beverage selection, the
individual settings are overwritten by the default
values for the beverage selected (factory settings).
If you only want to alter the settings for a beverage
key that has already been allocated, skip this setting
step.
To Next Page
Loading...
Need help?
General
