101
The following display appears:
Press the
or soft keys to alter the boiler
temperature, starting from the current setting. The change
is displayed both graphically and as a percentage.
Maximum deviations of approx. + 2% / - 3% can be set.
Bigger changes can only be made by WMF customer
service.
8.3.5 Mode (self-service)
To change the mode of operation of your coffee machine,
in the “Settings / machine” menu:
Start by pressing the OperatingMode soft key.
The following display appears:
If you would like to operate your coffee machine as a self-
service machine, press the SelfServ.Mode soft key.
If we want the coffee machine to run in self-service mode
but still have the storage urn with its contents shown, press
on soft key SS+StC Display. Note: Settings can then no
longer be altered by pressing in the storage urn. Changes in
this case must be made via the selection menu and storage
stages.
In the following display, you are asked to press
to
confirm your choice.
In self-service mode, the following display then appears
immediately, in place of the empty storage urn:
8.3.6 Setting the date and time
The machine is ready for operation and the following
display is shown, or the display for the storage setting
selected:
By pressing the
soft key, you can access a second
level, where there is a selection menu. Here you can set
the date and time.
To Next Page
Loading...
Need help?
General
