100
If you want to allocate a new beverage name to a beverage
key on the control panel, press the description of your
desired beverage on the list soft key.
In the example shown here, the beverage selected was
“Cup coffee”. Press to quit the setting menu without
accepting the changes.
8.3.3 Quantity of ground coffee
To alter the quantity of ground coffee for your beverages,
in the “Settings” menu:
Start by pressing the Machine soft key.
The following display appears:
Press the Coffeepowder soft key. The following display
appears:
Next, select the brewing quantity for which you wish to set
the quantity of ground coffee, for example 1 Litre .
Settings can be made for the following brewing batches:
1 litre for the setting Half-full and Manual 1 litre
2 litres ECO for the setting Full ECO
2 litres for the setting Full
The following display appears:
Press the
or soft keys to alter the quantity of
ground coffee, starting from the current setting. The change
is displayed both graphically and as a percentage. It is only
possible to make small changes to quantities. Bigger
changes can only be made by WMF customer service.
8.3.4 Boiler temperature
To alter the boiler temperature, in the “Settings / machine”
menu:
Start by pressing the Temperature soft key.
To Next Page
Loading...
Need help?
General
