138
11.1.2 Semi-automatic cleaning
(via the manual input)
The machine is ready for operation and the following
display is shown, or the display for the storage setting
selected:
Press the
soft key to enter a second level, where a
selection menu allows you to run the cleaning program.
If you have allocated access authorisations (PIN numbers)
(see chapter 8.4 on page 103), on pressing the
soft
key you will be asked for your PIN number. Key in your
PIN number. When the correct PIN number is input, the
selection menu is displayed
If you wish to run the machine cleaning program, press the
soft key in the selection menu.
The following display appears:
Select the Machine soft key in order to clean the machine.
Press the SwitchingOff soft key or the no SwitchingOff
soft key to choose whether the machine is to return to
“ready” mode after cleaning, or to be switched off
automatically after cleaning – in this case, press
SwitchingOff.
After selecting the cleaning mode, you will be asked again
to confirm that you wish to clean the machine. Press the
soft key to confirm your choice, or press to quit the
selection without carrying out cleaning.
Any remaining coffee will then be drained from the storage
urn automatically during cleaning. Before cleaning starts,
you will now be asked to fit the cleaning adapters
underneath the spouts.
To Next Page
Loading...
Need help?
General
