96
However this does not apply to your coffee machine in
self-service mode. In this case, instead of the storage urn,
the display shows a large cup (see chapter 8.3.5 on
page 101).
Pressing on the blank area of the display will produce the
additional symbol
, which can be used to call up user
information about the machine, etc.
The symbol additionally appears if a malfunction has
occurred.
Pressing the
soft key takes you into a second level,
where a selection menu is available. If you have allocated
access authorisations (PIN numbers) (see chapter 8.4 on
page 103), on pressing the soft key you will be asked
for your PIN number. Key in your PIN number. When the
correct PIN number is entered, the selection menu is
displayed.
This selection menu allows you to set or alter various
settings, depending on your access authorisations. The
individual menu items are explained step by step in the
following chapters:
Quantity storage (see chapter 7.5 on page 89 )
Cleaning (see chapter 11 on page 134)
Managing access rights (PIN number) (see chapter 8.4 on page 103)
Settings (see chapter 8.3 on page 98 )
Allocation of access authorisations (PIN code) (see chapter 8.4 on page 103)
Unit number accounting (see chapter 8.5 on page 106)
Manual dispensing (see chapter 8.6 on page 106)
Timer functions (see chapter 10 on page 120)
8.1 General symbols
For general menu control, the following symbols are used
with the following meanings:
Confirm or start a step or
store settings
To Next Page
Loading...
Need help?
General
