114
Settings
• Filling the tubes with change
Press the yellow key and the “A” key on the coin
changer and insert coins via the coin checker. The
tubes are filled up to the preset level. Once the levels
have been reached, any further coins will be rejected.
After filling up, press the “A” key to return to normal
mode.
Paying out coins /emptying tubes
On pressing the keys, one coin is paid out of the
corresponding tube each time. If you press the “A”,
“B”, “C”, “D”, “E” key for longer than three seconds,
the coins will be paid out automatically until only a
minimum (the minimum reserve) is left. This
minimum is sufficient to operate the pay-out
mechanism. To empty a tube or box, you may need to
remove the last few coins manually.
Automatic emptying to a preset level
If your coin changer is programmed for this function,
press the keys
“A”, “C”
to pay out coins until the levels in the tubes reach the
preset levels. If the number of coins already in the
tubes is the same as or less than the level, no coins will
be paid out.
Setting the selling prices
There is an input keypad in the coin changer housing.
You can use this keypad to change the following items:
Keys: Display:
PRINT /ABR
Beverage Editor
Bev. No. 36 >>
Enter number of beverages
(e.g. on the combiNation S)
1 6
Beverage Editor
Bev. No. 36 >>
ENTER Press key to confirm.
Beverage Editor
Bev. No. 16 >>
>> (only if a second machine is connected)
Beverages Slave 1
Bev. No. 08 >>
>>
Beverage number 01
To Next Page
Loading...
Need help?
General
